Category: JETBOATS
NEW (0)USED (7)

Search in this Category   [ Advanced Search ]
Search in
Search item title and description
The keywords will be matched with the item's name and description

Shop in Stores
 » HighPerformanceBoats
Sort by:
8 listings found Page: [ 1 ]
· Featured Listings
21 foot eliminator pickle fork - $17000 (Moscow, ID)
21 foot eliminator drag boat in excellent shape. I have a full cover and 2 axle trailer. The boat without engine is $17,000. With the race 502 with 645 hp and many extras. Boat has a dominator pump with push button jetovator, many extras on boat as well. With engine asking $25,000.
Call ERIK ☎ (509) 592-5951
USD 25,000.00
16' Earl Smith Texas Tunnel Jet Boat - $8500 (Fort Worth)
16 ft Earl Smith Drag Boat. Complete ready to run. Has ran the 10 and 11 second classes with SDBA. Big block ford. Very nice condition. 817-937-7305
USD 8,500.00
1971 Rayson craft drag v drive boat Vintage Project - $4200 (East setauket)
This is a 1971 Rayson craft 20 ft drag boat. It is hull #21 in it's previous life.. It had a blown 468 big block in it but we decided to restore it and make it insane. The top deck of the boat was completely removed and rebuilt with lightweight honeycomb style glass. The entire boat was stripped down and beautifully painted . A flush pop up cleat was installed on the bow. All the parts that were removed from the boat were powder coated to make final assembly perfect. The boat has it's casalle v-drive and the original velvet drive unit as well. As you can see this is an unfinished project but I have pretty much everything that came with the boat originally including the beautifully bolster seats front and rear. The seats have been tossed around for the last 20 years and have scuffs and slight tears . They also might not fit the new modified hull. We also have a pair of ATL stainless fuel cells custom fabricated to the hull. They are a piece of art, again, everything we have gotten is brand new in the packaging. New prop shaft couplers include just some of the parts that go with it.
The entire original trailer was rebuilt utilizing all new leafs, axles, new tongue, lights, powder coated fenders and rims w/tires. New hard rollers will make this boat float on and off with ease.
I would include everything that should come with the hull including steering shaft and all cavitation plate hardware. Again, this is a project, expect tons of parts to go with it. This boat would be an amazing sight and I would love to see it get finished.
I have a ridiculous engine and transmission for sale separately as well. The engine is a new Dart 496 stroker Big block with dart pro 1 heads. It has a Liberty forged crank and rods fitted by Jack Merkel racing engines. Custom JE pistons with a Bullet roller cam, stainless steel rocker arms. Dart stud girdles and a big chief intake manifold set up for fuel injection. The blower has been sold but I do have a custom massive intercooler available. I have a fully programmable fuel injection management system and full MSD ignition as well.
The trans is a 2 speed Power glide built to withstand the 1000 hp engine. It has a Custom CFI housing, clutch packs and valve body. There's just to much to list! We have spent over $60,000 searching, locating and purchasing the very best of the best to make this one of the sickest vintage drag boats out there! The engine and transmission are sold separately, feel free to ask any questions, Scott 516.456.0980
USD 4,200.00
1986 Liberator Jet Drag boat 19' w/ twin turbo LS motor - $19500 Kansas City
This boat is the real deal, very fast, dependable, and does have a back seat. It is a Jet drive, setup for racing as it sits. All fresh, needs nothing, comes on a dual axle trailer, has the BEST of everything. Willing to TRADE for a pleasure hull/boat with a blower or twin turbo motor. Willing to sell hull only and keep motor. OPEN FOR TRADES & OFFERS......
USD 19,500.00
1978 Kachina Jet Boat - $8000 (Denton) Texas
1978 Kachina Jet Boat. Has Dominator Pump with Aggressor Droop snoop and turning fins. Boat has had three inches cut from the hull and readapted with Kevlar mold into hull to lower boat and decrease hook effect of boat. Comes with Hotfoot pedal, cavitation plates, Sea strainer/water separator, Dry run hookups, Place diverter and handle, forward/reverse, Drag race Maximum Performance water pickup, etc. Motor is a newly built 454 Chevrolet Bored .060 over with new clevite bearings, Carillo Rods, Steel Crank newly polished, 11.5/1 Speed Pro Pistons, .305 Competition Hydraulic camshaft, Rectangular Port Heads with Steel roller rockers, Performance pushrods, Holley Strip Dominator intake, Holley 1050 with all additional extra jets, Braided Hoses, Etc. Motor was built by Grice Machining in Durant Oklahoma for running Nitrous. Motor has about 2 hours and sounds great. As far as boat itself, it could use new paint. Boat only runs on Race Fuel, NO PUMP GAS! Price is $8,000 OBO Hate to sell but never find time to take out.

contact name:


call or text

☎ (940) 665-3814

USD 8,000.00
Jet Boat Manta - $2000 (Bartow) FL

Boat and trailer.

Been setting 2 years jet pump has approx 3 hours on it since it was custom built. Has stainless steel load chute, teflon wear ring, stainless steel impeller. 9 vane racing bowl, bowl stuffer, HTP extension chute, place driver, pop-off valve, polished aluminum motor mounts, stainless steel headers.

Was set up for a BBC. Will accept any engine.

drag boat, racing boat

☎ (863) 303-6353

USD 2,000.00
79 sleek kraft jet boat - $3500 (friendswood) TX
1979 jet boat paint is ok interior is ok motor is out of boat for rebuild tired of messing with it comes with everything carb to pan. 3500 obo motor is a bbc 468 oval port heads less then one hr. run time needs rod bearings has light knock stopped running it so it wouldnt hurt anything
Call Travis (832) 306-8181 ext. 832
USD 3,500.00
· Other Listings
Cole Dominator Jet Boat
1977 Berkley 12jg-a pump,BBC 502, sits on V&M trailer, Basset Joe at (559) 250-3692...$12,500 OBO
USD 12,500.00