Featured Ads
Sort by:
33 listings found Page: [ 1 ] 2 3 4 [>] [>>]
· Featured Listings
Sanger picklefork drag hydro Superlite - $25000 Olympia ,Seattle
This boat is a classic with tons of racing history. born as a top fuel boat then converted to super comp. it has 8 championships and i have spoken to 3 of the 4 owners that raced it. 496 big block, call for details. I have a time slip of 154 mph, not by me! you can see youtube videos of it at camp far west all the way back to 10 years ago. I also have a trailer dolly (extra) to fit under the boat so you can fit it inside an enclosed trailer or toyhauler like I have. this boat is fast, it is cool, I don't care how tough you think you are or how cool you think you might be, if you provoke this boat it will scare the crap out of you. before you can clear the tears from your eyes you are already over 100 mph. its just plain bitchin!

$25,000 cash only!

phone calls only! no texts, no emails

hot boat race boat classic ☎ (360) 951-8968
USD 25,000.00
Kurtis Runner Bottom V-Drive - $9000 (Lake Havasu)
1974 Kurtis Runner bottom V-Drive with a fresh carb to pan 468 Big Block Chevy. Comp roller.Very light layup hull, Trick flow, new MSD marine box, new distributor, rebuild and balanced drive shaft, new starter and new battery. Casale with whirlaway, new hoses and pump, Vintage Gil headers. Hull is solid. floor and stringers in good shape, 2 forward seats and two side jump seats. Fresh glass work done on stringers and a full rail kit installed. Comes with a 3 blade ski/power prop, Life vests, Jones tach.

This 1 inch runner bottom is a Fast boat and a head turner, but not perfect, comes with a tandem axle trailer with new modern safety tongue, new bunks and side panels, new chains and wire harness, new lights. Tows very nice, Tires are fair. (928) 846-7717

Boat Exterior needs paint work, mainly clear coat is going. Clean Title in hand on both, must sell. (928) 846-7717
USD 9,000.00
Custom built Chevy 350 V-8 with aluminum high rise intake, Holley 650 double pumper carberator, water cooled chrome headers, chrome valve covers, Holley high pressure fuel pump, new battery, new boat cover, new anchor, new rugs, trailer is tandem axle with aluminum wheels, and bearing buddies. 2 New front seat upholstery($400), floor accelerator pedal, Mercruiser out drive, 5 blade staineless steel prop, great on fuel, and will do 0 to 50 in about a second. boat is mechanically sound, retro and runs great, orange and rootbeer brown metallic paint. $1000s of dollars in upgrades and parts.

$7500.00 OBO 541 233-8sevenzerosix, no scams, soliciting, or advertisers, calls preferred, rarely check e-mails.
USD 7,500.00
OLD DRAG BOAT - $2500 (santa rosa)
USD 2,500.00
21 foot eliminator pickle fork - $17000 (Moscow, ID)
21 foot eliminator drag boat in excellent shape. I have a full cover and 2 axle trailer. The boat without engine is $17,000. With the race 502 with 645 hp and many extras. Boat has a dominator pump with push button jetovator, many extras on boat as well. With engine asking $25,000.
Call ERIK ☎ (509) 592-5951
USD 25,000.00
V drive v bottom - $6800 (Lake havasu)
V drive V bottom, hondo copy. 3D Custom boats T deck. Casale V drive, 350 chevy standard bore 12-1 compression ratio, forged pistons, H beam rods 461 heads. Stainless steel valves, comp roller valve train, msd ignition. Boats set up to run E85 runs and drives grate. 6800 obo. 701-339-0310 or 701-641-2692
USD 6,800.00
1992 jbx placecraft tunnel hull jet boat $7500 Columbus OH
1992 jbx placecraft tunnel hull jet boat
Berkeley pump, tandem trailer, place dirverter,
set up for big block chevy
headers , mounts , drive shaft
great looking ride !
drop in your 454 and go boat !
$7500 obo less eng
USD 7,500.00
Drag Boat - $15000 (Central Point) CA
Eye candy! 79' 18' Brendella 2" runner bottom v drive. 396cid mild build big block Tunnel Ram. Dual Demon carbs. Zoomy exhaust. Also includes set of Bassett over transom headers w/water injection. Paint, stringers, floor seats, paint and trailer are 8.5 out of ten. Runs in the 80mph range.
$15,000.00 obo
USD 15,000.00
16' Earl Smith Texas Tunnel Jet Boat - $8500 (Fort Worth)
16 ft Earl Smith Drag Boat. Complete ready to run. Has ran the 10 and 11 second classes with SDBA. Big block ford. Very nice condition. 817-937-7305
USD 8,500.00
1971 Rayson craft drag v drive boat Vintage Project - $4200 (East setauket)
This is a 1971 Rayson craft 20 ft drag boat. It is hull #21 in it's previous life.. It had a blown 468 big block in it but we decided to restore it and make it insane. The top deck of the boat was completely removed and rebuilt with lightweight honeycomb style glass. The entire boat was stripped down and beautifully painted . A flush pop up cleat was installed on the bow. All the parts that were removed from the boat were powder coated to make final assembly perfect. The boat has it's casalle v-drive and the original velvet drive unit as well. As you can see this is an unfinished project but I have pretty much everything that came with the boat originally including the beautifully bolster seats front and rear. The seats have been tossed around for the last 20 years and have scuffs and slight tears . They also might not fit the new modified hull. We also have a pair of ATL stainless fuel cells custom fabricated to the hull. They are a piece of art, again, everything we have gotten is brand new in the packaging. New prop shaft couplers include just some of the parts that go with it.
The entire original trailer was rebuilt utilizing all new leafs, axles, new tongue, lights, powder coated fenders and rims w/tires. New hard rollers will make this boat float on and off with ease.
I would include everything that should come with the hull including steering shaft and all cavitation plate hardware. Again, this is a project, expect tons of parts to go with it. This boat would be an amazing sight and I would love to see it get finished.
I have a ridiculous engine and transmission for sale separately as well. The engine is a new Dart 496 stroker Big block with dart pro 1 heads. It has a Liberty forged crank and rods fitted by Jack Merkel racing engines. Custom JE pistons with a Bullet roller cam, stainless steel rocker arms. Dart stud girdles and a big chief intake manifold set up for fuel injection. The blower has been sold but I do have a custom massive intercooler available. I have a fully programmable fuel injection management system and full MSD ignition as well.
The trans is a 2 speed Power glide built to withstand the 1000 hp engine. It has a Custom CFI housing, clutch packs and valve body. There's just to much to list! We have spent over $60,000 searching, locating and purchasing the very best of the best to make this one of the sickest vintage drag boats out there! The engine and transmission are sold separately, feel free to ask any questions, Scott 516.456.0980
USD 4,200.00